The short answer: Post-loss security protects a damaged property between the loss and the repair: it prevents further damage and theft, controls who enters, protects staged equipment, preserves conditions for investigators, and produces time-stamped documentation. For adjusters, restoration contractors, attorneys and receivers, it removes a source of new claims, disputes and delays.
If you work losses for a living, you've seen it: the fire was bad, but the second event made it worse. The break-in three nights later. The copper stripped from the undamaged half of the building. The trespasser's fire. The drying equipment that walked off over a weekend.
Post-loss security exists to stop the second event. Here's how it plugs into the work you're already doing.
The gap every loss creates
Between the loss and the repair, a property is in its most vulnerable state:
- Openings can't be closed or locked.
- Alarms, cameras and access control are offline.
- Occupants are gone; the building looks abandoned.
- Valuable equipment is staged inside by restoration crews.
- Multiple parties need access, and nobody is managing it.
Vacant-building data shows why that matters. Half of vacant building fires are intentionally set, versus about 10% of all structure fires, and in unsecured vacant properties the share is about 61%.[1] A damaged, unoccupied building shares many of those conditions.
For insurance adjusters
What you need: the property protected from further loss, a clear record of conditions and no surprise supplemental claims.
How security helps: - Reduces additional loss. A visible officer and marked vehicle deter theft, vandalism and intentional fires. - Documents conditions over time. Time-stamped patrol logs and photos show what happened on site, and what didn't, during the claim. - Reports changes immediately. New water intrusion, a tarp failure or a forced door gets reported the night it happens.
Vacancy matters too. Many commercial property policies restrict coverage for vandalism, theft and water damage once a building has been vacant more than 60 consecutive days and reduce payment on other covered losses by 15%.[2] On long repairs, security lowers the odds of the exact losses those provisions exclude. More in the vacancy clause explained.
For restoration and mitigation contractors
What you need: your equipment still there in the morning, your crews able to work, and no blame for what happened overnight.
How security helps: - Protects staged equipment: dehumidifiers, air movers, generators and tools. - Controls site access so only authorized crews enter. - Logs every entry with company, name and time, useful if something goes missing. - Covers nights and weekends when your crews are gone and the building is most exposed.
Recommending security on day one also protects your reputation: when the owner's inventory is safe, your job goes smoother.
For attorneys, receivers and lenders
What you need: a neutral party controlling access and a factual record.
How security helps: - Neutral access control for disputed, distressed or court-supervised property. - Visitor and vehicle logs showing exactly who entered, when and why. - Incident reports written factually, without opinions or speculation. - Condition documentation over the life of the assignment.
For fire and cause-and-origin investigators
Scene integrity matters. Security can keep unauthorized people out of the scene, log everyone who enters and alert the investigator if conditions change. For fires, see the first 24 hours after a commercial fire.
What working with BR USA looks like
- One call, any hour. You give us the address, the situation and who's authorizing coverage.
- Same-day mobilization with a marked vehicle and an officer.
- Written post orders built around your access list and escalation contacts.
- Shared reporting: logs and incident reports go to whoever the file requires: owner, adjuster, contractor or counsel.
- Scaling with milestones: from 24/7 to overnight to patrol checks to handback as the property is secured.
Make us part of your vendor list
The best time to vet a security partner is before the next loss. If you're an adjuster, restoration contractor, public adjuster, attorney or receiver working in the Charleston area, call (843) 606-0195 and we'll walk you through how we set up, report and invoice post-loss assignments.
Frequently asked questions
Why would an adjuster recommend security after a loss?
An open, damaged property can suffer additional losses such as theft, vandalism, intentional fires and weather intrusion. Security reduces those risks and documents the property's condition during the claim.
Can security protect restoration equipment left on site overnight?
Yes. Drying equipment, generators and tools are valuable and portable. A posted officer or patrol protects staged equipment and logs who accesses it.
How does security help attorneys and receivers?
A neutral security presence controls access to disputed or court-supervised property and produces time-stamped logs and incident reports that create a factual record.
Can BR USA Security bill the property owner directly?
Billing arrangements are set per assignment. Tell us who is authorizing coverage and how invoicing should be handled, and we'll document everything needed for the file.
Sources
- Office of State Fire Marshal Recognizes National Arson Awareness Week (USFA and NFPA vacant building fire data). North Carolina Department of Insurance. Accessed October 3, 2026.
- What Constitutes a Dwelling or Building Under Construction or Renovation for Purposes of a Vacancy Exclusion?. Property Insurance Coverage Law Blog (Merlin Law Group). Accessed October 3, 2026.
