BR USA Security
(843) 606-0195Request CoverageCall

Vacant Property Security: Why Empty Buildings Burn, Get Stripped and Get Occupied

BR USA Security Operations Team · · 5 min read

The short answer: Vacant buildings are disproportionately targeted: national data shows they account for about 6% of structure fires, but half of their fires are intentionally set, and unsecured vacant buildings fare worse. Effective vacant property security combines physical securing (locks, boards, cleared combustibles), utility and insurance decisions, and regular documented patrols that make the property look watched.

An empty building talks. The overgrown landscaping, the dark windows, the mail piling up, the parking lot with no cars at 10 a.m. They all say the same thing: nobody's watching.

The people who listen for that message aren't buying real estate. Here's who they are, what they do, and how to make your vacant property stop broadcasting.

The numbers: vacant buildings punch above their weight

According to NFPA research covering 2011-2015, U.S. fire departments responded to an estimated 30,200 fires a year in vacant buildings, about 6% of reported structure fires.[1] That share sounds small until you look at the causes:

Fires in vacant buildings are also more likely to spread to neighboring structures than other structure fires.[1] Federal data paints a similar picture: from 2013 to 2015, an estimated 6,400 vacant nonresidential building fires were reported each year, with intentional actions the leading cause.[2]

Who targets vacant buildings, and what they want

Scrappers want copper pipe, wire and HVAC equipment. The damage from ripping it out, such as cut lines, flooded floors and wrecked walls, routinely costs far more than the metal is worth.

Squatters and shelter-seekers want a dry place to stay. Once someone is living inside, removal can take time and process, and the fire risk climbs, from candles, heaters and cooking.

Vandals and thrill-seekers want somewhere unwatched. Graffiti and broken glass are the visible part; the open doors they leave behind invite the next group.

Arsonists want something to burn. Unsecured, unwatched buildings are where intentional fires concentrate.

Step 1: Physically secure the building

The fire code agrees. NFPA 1, the Fire Code, requires owners or those in charge of vacant buildings to remove combustible waste and secure the building against unauthorized entry.[3]

Step 2: Make your utility and insurance decisions on purpose

Insurer risk engineers recommend weighing which systems stay active in a vacant building, including fire protection, alarms and heat, and keeping fire protection maintained.[4] Decide deliberately:

Step 3: Make it look watched, because it is

Physical security slows people down. Visible activity changes their decision.

Step 4: Document everything

A vacant property file should show what the building looked like when it emptied and how it was checked since: dated photos, patrol logs, incident reports, repair records. That file supports insurance claims, vacancy permit discussions and, if it comes to it, legal questions about whether you took reasonable care.

How much coverage does a vacant building need?

Situation Typical coverage
Just vacated, contents still inside Nightly or continuous coverage until secured
Secured, low-visibility location Scheduled patrol checks
Prior break-in or squatting Continuous coverage until resolved, then scale down
Fire- or storm-damaged and open 24/7 posted coverage
Long-term vacancy, insurer conditions Patrols on the schedule your insurer requires

The bottom line

Vacant buildings don't get targeted because they're valuable. They get targeted because they're easy. Make yours hard to enter, cleared of fuel, and visibly watched.

BR USA Security protects vacant commercial and residential properties across the Charleston area with marked patrol vehicles, scheduled inspections and written reports. Call (843) 606-0195.

Frequently asked questions

Why are vacant buildings targeted?

No one is there to notice entry, systems are often off, and the building signals that from the street. That attracts trespassers, scrappers, squatters and people who set fires.

How often should a vacant building be inspected?

It depends on risk, location and insurance requirements. Higher-risk or recently vacated properties may need nightly or continuous coverage; lower-risk properties may need scheduled patrol checks. Ask your insurer what they expect.

What does the fire code require for vacant buildings?

NFPA 1, the Fire Code, requires owners or those in charge of vacant buildings to remove combustible waste and secure the building against unauthorized entry. Local requirements may add more.

Does vacancy affect my insurance?

Often, yes. Many commercial policies restrict coverage for vandalism, theft and water damage once a building has been vacant more than 60 consecutive days, and reduce payment on other losses.

Sources

  1. Vacant Buildings & Squatters (summary of NFPA, Fires in Vacant Buildings, 2018). City of Pueblo, Colorado. Accessed October 3, 2026.
  2. Office of State Fire Marshal Recognizes National Arson Awareness Week (USFA and NFPA vacant building fire data). North Carolina Department of Insurance. Accessed October 3, 2026.
  3. Vacant Building Fires (M. Ahrens, NFPA). NFPA, hosted by U.S. Department of Housing and Urban Development. Accessed October 3, 2026.
  4. Protection of Vacant or Idle Buildings. The Hartford Risk Engineering. Accessed October 3, 2026.